이온 바(ION BAR)

제.품.사.양

PRODUCT
SPECIFICATIONS

Category Specifications
입력전압 (Input Voltage) DC 24V± 10%
입력 전류 (Input current) MAX. 300mA
소모 전력 (Power consumption) Max. 7W
방전 전압 (Emitter voltage) ±4.75kV~±5.5kV (4level adjustable)
출력 주파수 (Output frequency) 0.1Hz ~ 60Hz (adjustable)
이온 발생 방식 (Ion generating method) Corona discharge
전압 인가 방식 (Voltage application method) Pulsed AC
재 질 (Material) Body : ABS / Emitter Pins : Tungsten
방전핀 교체 (Emitter replacement) Replaceable
이온 밸런스 (Ion balance) Under average ±15V
제전 거리 (Coverage distance) 200mm ~ 2000mm
공급
에어
(Air)
종 류 (Type) CDA(Clean Dry Air), N2
압 력 (Pressure) 0 ~ 0.5 Mpa (Usually under 0.3Mpa)
유 량 (Flow) / Per 1 emitter 2L/min(±10%) [under 0.1Mpa]
공급튜브 직경 (Air tube diameter) 6pi (Outside)
오존발생량 (Ozone generation) Under 0.05ppm
사용온도 (Ambient temperature) 0℃ ~ +50℃ (32~122℉)
사용습도 (Ambient humidity) 35~85%RH (No condensation)

※ 제품의 사양은 별도의 통보없이도 변경될 수 있습니다.

Specifications are subject to cahange without notice.

제.품.장.점

ADVANTAGES

MB-Series 대비 단면적 40% 감소
Cross-sectional area reduced by 40%
MB-Series 대비 부피 및 중량이 현저히 감소하여 좁은 공간에서도 설치가 용이합니다.
Easy to install even in narrow space due to remarkably reduced size and weight.
자유로운 설치 180-degree rotation
전용 브라켓 사용으로 설치가 더욱 자유로워 졌습니다. 기존 상하 조절 각도 120˚에서 180˚로 개선하여 보다 자유로운 설치가 가능해 졌습니다.
New brackets, which is able to tilt 180 degree vertically, provide more freedom in installation
Low-maintenance
최적의 노즐 설계로 Air 소모량을 줄이면서 이물의 생성을 최소화 합니다.
Special nozzle is designed to reduce air supply requirement and minimize pollutant production and accumulation on emitter pin.
노즐의 Air 소모량을 줄이면서 방전핀 첨단부에 이물 부착을 최소화 할 수 있는 Aerodynamic 구조 설계.
Special nozzle is designed using aerodymamics.
* 노즐당 Air 소모량
Air supply requirement (per emitter)
0.3Mpa ….. approx 5.1 ℓ/min
0.1Mpa ….. approx 2.0 ℓ/min

제.품.성.능

PRODUCT
PERFORMANCES

Relation between Depth Direction and Decay Time
Relation between Width Direction and Decay Time
※ 상기 성능그래프는 당사 실험실 기준입니다. (This graph is based on our laboratory environment testing.)

제.품.외.관.도

DIMENSIONS

상기 Length값은 Air-Fitting부 제외 길이 입니다.
Air-fitting part is not included in the length above.
ASG-A Series의 길이는 최소 502mm에서 최대 2962mm 까지 60mm 간격으로 길이 대응이 가능한 제품입니다.
Bar Length : Sizes available from min 502mm up to 2962mm at 60mm intervals.
※ 모든 부속물 별도 구매 All parts NOT included (Option : Bracket/Power cable)